Contact Us

Telephone:+86-150-3754-7447

Fax:+86-0375-2210299

E-mail: hplichuangkeji@163.com

Address: 300 m east of the intersection of Xinhua Road and Xinninhuan in Pingdingshan City

undefined
+
  • undefined

LC-PC-FZ polycarboxylate high performance water reducing agent (powder type)

Powdered polycarboxylic acid high-performance water reducing agent is a new generation of polycarboxylic acid high-performance water reducing agent developed by our company. It is a long-chain graft polymer produced by a unique process and a powder product produced by a special powder manufacturing process. After the incorporation of this product, the concrete has the characteristics of low doping, high water reduction, high slump, small slump loss, small shrinkage and so on. Compared with similar admixtures at home and abroad, this product has both high performance and low cost.

Key words:

Key words:

LC-PC-FZ polycarboxylate high performance water reducing agent (powder type)

Product Consulting:

  • Product Description
  • Executive standard: JG/T223-2007 GB8076-2008 TB/T3275-2011

    ProductsOverview:

    Powdered polycarboxylic acid high-performance water reducing agent is a new generation of polycarboxylic acid high-performance water reducing agent developed by our company. It is a long-chain graft polymer produced by a unique process and a powder product produced by a special powder manufacturing process. After the incorporation of this product, the concrete has the characteristics of low doping, high water reduction, high slump, small slump loss, small shrinkage and so on. Compared with similar admixtures at home and abroad, this product has both high performance and low cost.

     

    Technical performance:

    Strong adaptability, good dispersion and plasticity of all kinds of cement and admixture, can make the concrete slump almost no loss in 1~2 hours, and has the same performance in high temperature climate without being affected;

    Low dosage, high water reduction rate, small shrinkage;

    Greatly improve the early and late strength of concrete;

    the ability of concrete to resist freezing and thawing is obviously improved;

    Concrete does not bleed or segregate, concrete has good cohesive performance, no large bubbles, good concrete appearance quality and excellent workability; it can reduce the shrinkage deformation of concrete and improve the crack prevention performance of concrete;

    Better dispersion and self-compacting, can be prepared with different strength grades of super-fluid self-leveling concrete;

    The product is chlorine-free, ammonia-free, low-alkali, non-corrosive to steel bars; no "three wastes" emissions in the production process, and is a new generation of green environmental protection products;

    Product white powder, can all dissolve in water;

    Reduce costs, reduce freight, packaging costs.

     

    Scope of application:

    Powdered polycarboxylic acid superplasticizer due to low dosage and good fluidity, excellent self-healing, anti-bleeding and segregation characteristics are widely used in self-leveling mortar, non-shrinkage grouting material and other special dry-mixed mortar.

    It is suitable for precast and cast-in-place concrete, reinforced concrete and prestressed concrete in the construction of high-speed railway, passenger dedicated line, industrial and civil buildings, roads, bridges, ports, airports and other projects.

    Especially suitable for the preparation of concrete construction time is long, the coagulation and slump to maintain high requirements of the project, such as nuclear power engineering.

    Product performance is stable, long-term storage without stratification, no precipitation, no crystal precipitation in winter, non-toxic, non-irritating and radioactive, will not rust the steel material.

     

    Performance indicators:

    Project

    performance index

    Inspection results

    Formaldehyde content%

    ≤ 0.05

    0.003

    Fluency of cement paste mm

    ≥ 240

    270

    Sodium sulfate content%

    ≤5.0

    1.1

    Chloride ion content%

    ≤0.6

    0.13

    Alkali content (Na2 0.65k2o)%

    ≤ 10.0

    1.8

    Gas content

    ≤ 3.0

    2.7

    Slump retention value mm

    30min

    ≥180

    195

    60min

    ≥ 150

    175

    Project

    performance index

    Inspection results

    Water reduction rate%

    ≥25

    28

    Normal pressure bleeding rate%

    ≤20

    0

    Pressure bleeding rate%

    ≤ 90

    45

     

    ≥ 140

    1.1

    ≥ 130

     

    Corrosion effect on reinforcement

    No rust

    No rust

    Shrinkage ratio%

    ≤110

    97

    Phase durability index%, sub -200

    ≥80

    85

     

    Method of use:

    This product is a powder product, which can be diluted with water to a relative concentration of liquid products, or directly mixed with powder (such as dry powder mortar). The general doping amount is 0.15 to 0.3 percent of the amount of cementitious material. When preparing ultra-high strength concrete, the dosage can be increased appropriately.

    This product can be used with a variety of retarder, air-entraining agent compound. However, it shall not be compounded with naphthalene sulfonic acid water reducing agent. When it is used with other admixtures at the same time, the compatibility test shall be carried out first.

     

    Packaging and transportation:

    This product is lined with plastic film outer woven bag double packaging, each bag 25KG. Rainproof, moisture-proof, placed in a ventilated and dry place.

    This product has a valid period of one year, and can continue to be used after passing the test.

     

    Safety Guidelines:

    This product is non-flammable and explosive. No pollution to the environment, does not contain harmful ingredients that affect human health.

    Avoid contact with the skin, must wear gloves, eyes, mask.

    If the eye or skin splashes, should immediately rinse with plenty of water, and then immediately seek medical treatment.

     

    After-sales service:

    The company has a perfect after-sales service mechanism, at any time to provide users with technical support and on-site service, so that product performance to achieve better results.

     

    DisclaimerStatement

    This manual is for reference only and does not have any guarantee nature. Please test its compatibility in advance..

    The use of this product is beyond our control, and we do not assume any responsibility arising from improper use.Please refer to this product manualPlease consult us or your local dealer.

     

    LC-PC-FZ聚羧酸系高性能减水剂(粉状型)

Product inquiry

Concrete admixture and special mortar research and development, production, sales and technical services as one of the enterprises.

Picture Name

Customer Service Hotline

+86-150-3754-7447

Telephone:+86-150-3754-7447

Fax:+86-0375-2210299

E-mail: hplichuangkeji@163.com

Address: 300 m east of the intersection of Xinhua Road and huanghe road in Pingdingshan City

Contact Us

Picture Name

Copyright: Henan Lichuang Lier Technology Co., Ltd.

Supported for IPv6

SAF Coolest v1.3.1.1 设置面板QEHSX-AXPN-WSAXE-ZDV

图片ALT信息: Henan Lichuang Lier Technology Co., Ltd.

无数据提示

Sorry, the current column has no content for the time being.!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标,用div包起来,并命名使用