Products
Contact Us
Telephone:+86-150-3754-7447
Fax:+86-0375-2210299
E-mail: hplichuangkeji@163.com
Address: 300 m east of the intersection of Xinhua Road and Xinninhuan in Pingdingshan City
LC-KL prestressed duct grouting material is a grouting material composed of high quality cement and a variety of organic and inorganic materials. In the construction site according to the relative proportion of water, and after mixing evenly, for post-tensioned prestressed duct grouting. The product slurry is dense to protect the prestressed reinforcement from corrosion; the bond is firm to ensure the bonding force between the prestressed reinforcement and the concrete, so that the prestress can be effectively transmitted.
The LC-UEA of concrete expansion agent can reduce the dry shrinkage cracks of concrete, improve its crack resistance and impermeability, improve the installation quality of mechanical equipment and construction, and speed up the installation speed. After the incorporation of this product, the early strength of concrete develops quickly, the late expansion and contraction performance effect is good, the long-term strength of stable growth, no corrosion to the steel bar, can well inhibit the alkali aggregate reaction, this product compound GB23439-2009 the standard requirements.
LC-YQ concrete air-entraining agent can improve the workability of concrete, reduce the segregation and bleeding of concrete mixture, improve the durability and frost resistance of concrete, and its adaptation range is very wide. This product is used in antifreeze concrete, winter construction concrete, impermeable concrete, ready-mixed concrete, slip-form concrete, pumping concrete, roller compacted concrete and lightweight concrete, as well as hydraulic, marine, port, road engineering, can also be applied to surface decoration requirements of concrete and the preparation of air-entraining cement. The technical indicators of this product have reached the GB8076-2008 standard.
LC-DS low-alkali liquid accelerator is a high-efficiency liquid accelerator synthesized from inorganic salts and organic polymer materials. The product is low-alkali, chlorine-free, non-corrosive and non-toxic, and solves the problems of uneven addition of powder accelerator, large dust, large fluctuations in concrete strength, and obvious loss of strength in the later period. The product is used for wet shotcrete construction, can make concrete or mortar quickly set and harden, resulting in greater early strength. This product has no dust pollution and can greatly improve the construction environment.
LC-FS powder accelerator is a kind of concrete powder additive made by modified mineral, high aluminum active mineral and high efficiency hydration agent grinding and calcining into aluminum oxygen clinker (sodium metaaluminate), and then adding appropriate amount of cement to adapt to powder, thickener and other components by modified grinding. It and cement silicate minerals in concrete or mortar act rapidly to produce relative strength in a very short time, with high early and late strength. Performance is better than domestic similar products, by the user praise and trust.
This product is the introduction of foreign advanced technology, the use of inorganic, organic materials synthesis of new technology and research and development of a new generation of environmentally friendly chlorine-free, alkali-free liquid accelerator, this product is alkali-free, chlorine-free, does not harm the human body. It does not corrode steel bars, and can significantly promote the hydration of cement and the improvement of concrete strength, and has good compatibility with all kinds of cement. It is widely used in wet spray construction technology of various projects, reduces dust in construction, has less rebound loss, good concrete homogeneity and significant economic benefits. The performance index of the product has reached the international standard of similar products and has a leading position in similar products in China.
The product is a multi-specification hybrid steel fiber made of steel by relative process. It has high tensile strength, good dispersion and good bonding with cement matrix materials. It can not only effectively reduce the cracking phenomenon caused by self shrinkage and dry shrinkage of UHPC and RPC materials, but also significantly improve the bending resistance, impact resistance and fatigue resistance of UHPC and RPC materials. It is mainly suitable for the preparation of ultra-high strength fiber reinforced cementitious composites and reactive powder concrete. It has been successfully applied to key projects at home and abroad, such as Nanjing Fifth Bridge, Ningbo Airport Road, Changping Road, and so on.
The product adopts hydrophilic modification technology for surface treatment, which not only has good dispersion in concrete/mortar, but also has good bonding performance with cement matrix material, which can effectively reduce and inhibit the micro cracks caused by plastic shrinkage, drying shrinkage, temperature change and other factors of concrete/mortar, and effectively improve the crack resistance and toughening, impact resistance, permeability resistance, freeze-thaw resistance and fire-resistant and explosion-proof ability of concrete/mortar. It is suitable for functional mortar and concrete projects with high requirements for crack resistance, seepage control and impact resistance, such as industrial floor, tunnel lining, subway segment, etc. It has been successfully applied to Yangfanggou Hydropower Station, Xiangfu Bridge and other key projects at home and abroad.
The product uses hydrophilic modification technology for its surface treatment, has good dispersion in UHPC, and has good bonding properties with the cement matrix material, can effectively reduce and inhibit UHPC plastic shrinkage, drying shrinkage, temperature changes and other factors caused by micro cracks, effectively improve the UHPC crack resistance performance and toughening, impact resistance and fire resistance and explosion resistance.
The product is made of cold drawn steel wire forming and cutting, with tensile strength of 1200~1700MPa, which can be evenly distributed in concrete and has high bond strength with cement matrix material. Significantly improve the steel fiber concrete crack resistance, fracture toughness, tensile, shear, bending, abrasion resistance, anti-fatigue performance, anti-seismic and anti-explosion and post-crack ductility and other properties. It is widely used in highway pavement, bridge, tunnel, industrial floor, airport pavement, underground engineering, hydraulic engineering, hydropower station, port road, military and all kinds of concrete prefabricated components and other engineering fields. It has been successfully applied to key projects at home and abroad such as the Tibetan Wood Bridge and Changzhou Jaguar Automobile Factory.
The product is made of cold drawn steel wire forming and cutting, with tensile strength of 1200~1700MPa, which can be evenly distributed in concrete and has high bond strength with cement matrix material. Significantly improve the steel fiber concrete crack resistance, fracture toughness, tensile, shear, bending, abrasion resistance, anti-fatigue performance, anti-seismic and anti-explosion and post-crack ductility and other properties. It is widely used in highway pavement, bridge, tunnel, industrial floor, airport pavement, underground engineering, hydraulic engineering, hydropower station, port road, military and all kinds of concrete prefabricated components and other engineering fields. It has been successfully applied to key projects at home and abroad such as the Tibetan Wood Bridge and Changzhou Jaguar Automobile Factory.
The product is a special steel fiber made of steel by relative process. It has high tensile strength, good dispersion and good bonding with cement matrix materials. It can not only effectively reduce the cracking phenomenon caused by self shrinkage and dry shrinkage of UHPC and RPC materials, but also significantly improve the bending resistance, impact resistance and fatigue resistance of UHPC and RPC materials. It is mainly suitable for the preparation of ultra-high strength fiber reinforced cementitious composites and reactive powder concrete. It has been successfully applied to the sound barrier of Nanjing Metro Line 2, Shanghai-Kunming Railway and other key projects at home and abroad.
Concrete admixture and special mortar research and development, production, sales and technical services as one of the enterprises.
Customer Service Hotline
Telephone:+86-150-3754-7447
Fax:+86-0375-2210299
E-mail: hplichuangkeji@163.com
Address: 300 m east of the intersection of Xinhua Road and huanghe road in Pingdingshan City
Supported for IPv6
SAF Coolest v1.3.1.1 设置面板 QEHSX-AXPN-WSAXE-ZDV
图片ALT信息： Henan Lichuang Lier Technology Co., Ltd.
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page